
NFPA 70E expects every employer whose workers face electrical hazards to document an electrical safety program: the principles, controls and procedures you use, a risk assessment for shock and arc flash, job briefings, how you create an electrically safe work condition, and regular audits. OSHA uses NFPA 70E to show how to meet its electrical safety rules.
This page is one of ETC’s written programs resources.
Does OSHA require NFPA 70E?
NFPA 70E is a consensus standard, not an OSHA regulation. OSHA’s electrical safety rules (29 CFR 1910.331 to 1910.335) set the requirement, and NFPA 70E is the recognized way to show how you meet them. In practice, inspectors and clients expect your electrical work to follow 70E.
What the program must include
Principles, controls and procedures
Document the safety principles, the controls you use to reduce electrical risk, and the procedures your workers follow.
Risk assessment (shock and arc flash)
Include a procedure to assess shock risk and arc flash risk before work, and to select protective measures and PPE.
Job briefings and energized work permits
Require a job briefing before work, and an energized electrical work permit when work on or near live parts cannot be avoided.
Electrically safe work condition (lockout)
Establish an electrically safe work condition by de-energizing and verifying zero energy. This overlaps your written lockout/tagout program.
Incident investigation
Investigate electrical incidents and near misses, and feed what you learn back into the program.
Program and field audits
Audit both the program and field work on a set schedule.
Training and retraining for qualified persons
Qualified persons must be trained to recognize and control electrical hazards, and retrained on a set interval or when conditions change. ETC teaches Arizona electricians and maintenance teams arc flash NFPA 70E.
Template download
Want a starting point? Download the electrical safety program template and tailor it to your site. The form routes to our team and we reply within one business day.
FAQs
Is NFPA 70E law?
Not by itself. It is a consensus standard. OSHA’s electrical rules are the law, and 70E is the recognized way to comply, so following it protects you both ways.
How often must the program be audited?
On a set schedule for both the program and field work.
Who is a qualified person?
Someone trained to recognize and control the electrical hazards of the work, with the knowledge and skill the task requires.
Do we need arc flash labels?
Equipment that may be worked on while energized generally needs arc flash labeling so workers know the hazard and the PPE required.
ETC writes this program for Arizona employers and teaches the matching course.
We write it for you, then train your team. Call (602) 923-9673.
Call (602) 923-9673
